A bolt or screw of a particular property class should be assembled with the equivalent or higher property class of nut to ensure that thread stripping does not occur.
The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.
Stiffnut A term used to describe a lock nut which has a prevailing torque.Fundamental deviation An intentional clearance between internal or external bonus skazany thread and the design form of the thread when nagrand bonus ziele the thread form is on it's maximum metal condition.Calculation methods such as the asme code in the USA and the EN1591 code in Europe.Due to a difference in the size of the whorls (the round pieces or pulleys around which the drive band runs) the bobbin whorl, which has a smaller radius than the flyer whorl, turns slightly faster.Nominal diameter The diameter equal to the external diameter of the threads.If either the internal or external thread form exceeds the design form of the thread profile then a potential interference exists.

If the applied force is increased beyond the decompression point, a gap will form at the interface.Commingling A term used to describe the undesirable practice of mixing fasteners from different batches that are the same size and grade in the same container.Then the spinner overlaps a handful of fiber with the leader, holding both gently together with the left hand, and begins to slowly turn the drive wheel clockwise with the right hand, while simultaneously walking backward and drawing the fibre in the left hand away.All metal torque prevailing nuts generally gain a prevailing torque by distorting the threads at the top of the nut by some means.Allowance, an intentional clearance between internal or external thread and the design form of the thread when the thread form is on it's maximum metal condition.These types include hexagon socket, fluted socket, screwdriver slot and square head.Comparable devices were not developed in Europe until the 18th century.The charkha, a small, portable, hand-cranked wheel, is ideal for spinning cotton and other fine, short-staple fibres, though it can be used to spin other fibers as well.The major diameter of the screw being larger than the washer hole prevents it from coming off.The bolts are tightened to a specified minimum shank tension so that transverse loads are transferred across the joint by friction between the plates rather than by shear across the bolt shank.
For longer life, set screws are usually made of alloy steel and case hardened.